Lawn rebates in parts of San Mateo County

Eligible customers of the eight water agencies listed below can apply for a lawn rebate through BAWSCA's Lawn Be Gone! program, to replace lawn with a water-efficient landscape. BAWSCA is the Bay Area Water Supply and Conservation Agency. Check the water provider on your bill first. This page covers only the agencies listed below. Water agency areas do not always match city limits, so a home in one of these cities may have a different water provider. Customers of other providers, including Cal Water, are not covered here and have their own rules. The program is run by BAWSCA and your water agency, not by Designscape. Amounts, rules, and funding can change, and every rebate is subject to agency approval and available funds.

BAWSCA Lawn Be Gone! rebate pageProgram rates and rules, FY26-27 (PDF)

Find your water provider

BAWSCA lists these Lawn Be Gone! rates for each participating water provider. Rebates are for customers of the water provider named, per square foot of lawn replaced, and the rebate is limited to the actual cost of plants, irrigation equipment, and other direct costs. Some agencies set a maximum rebate; check your agency's terms.

Foster City (Estero MID) rebatesNorth Coast County Water DistrictRedwood City conservation programsBurlingame Lawn Be Gone!Millbrae noticeSan Bruno water rebatesHillsborough rebates

Apply before you start

Create an account on BAWSCA's online portal and apply with your water account number. You must submit your application and receive a Notice to Proceed from your water provider before you remove any lawn; lawn removed first is not eligible. Your water agency inspects the site and measures the area before it approves the project. At least 200 square feet of lawn must be converted; smaller projects are considered if they replace all of the front or publicly visible lawn. Except for North Coast County Water District customers, the lawn must be healthy and watered by a sprinkler system with city water, not a private well or recycled water. You upload the square footage, a project plan with measurements, and a plant list that shows 50% plant coverage. After the Notice to Proceed you have 4 months to finish, then your agency does a final inspection and you send a W-9. The converted area must stay converted for 3 years. BAWSCA says each water account can take part one time and that rebates may be paid as a check or a credit on your water account.

Apply online (BAWSCA portal)Terms and conditionsApplicant checklistProgram FAQs

Plan your new landscape

Plan for plants that cover at least 50% of the converted area when fully grown; plants outside the area do not count. Choose plants from the BAWSCA Approved Plant List, or show that they are low-water plants. Permeable hardscape such as gravel, brick, or flagstone laid without mortar is allowed, but concrete and other non-permeable surfaces are not, and the 50% plant rule still applies to the whole converted area. Artificial turf is not eligible. Mulch planting areas at least 3 inches deep. Existing sprinklers in the area must be removed, capped, or changed to low-volume drip, and a new irrigation system must be drip with a pressure regulator, filter, and pressure-compensating emitters. If only part of a lawn is converted, the new area needs its own irrigation valve. BAWSCA's project plan can be a hand-drawn aerial view with measurements.

Project plan worksheet (PDF)BAWSCA Approved Plant List (Excel)

[Artificial turf fact sheet (PDF)](https://bawsca.org/uploads/userfiles/files/Artificial%20Turf%20Fact%20Sheet(2).pdf)

Check your city's rules

City and water-district rules can add steps beyond BAWSCA's. Some local water-efficient landscape ordinances apply when a project needs a building or landscape permit, plan check, or design review, and for larger projects they can require plans prepared or signed by a licensed landscape architect, licensed contractor, certified irrigation designer, or other professional the state authorizes. If your project is large, needs a city permit, or your city asks for a plan prepared or signed by a licensed professional, a Designscape plan will not replace that. Check with your city's Planning or Building department, your water agency, and any HOA before you start.

Free resources

You do not have to hire Designscape, or any designer, to apply. BAWSCA's terms do not require a professional plan. BAWSCA offers a free project plan worksheet, the BAWSCA Approved Plant List, sample design plans, an applicant checklist and FAQs, and free water-efficient landscape classes, including lectures and hands-on workshops, each spring and fall. BAWSCA also links a directory of Qualified Water Efficient Landscapers (QWEL) for people who want to hire a professional; Designscape is not part of that list and does not endorse it.

Free landscape classes (BAWSCA)Helpful resources and sample design plansQualified Water Efficient Landscaper list (QWEL)

Your optional Designscape plan

Want a custom design-only plan for your application? Designscape can lay out planting and required features for your yard. Our design-only plan costs $2,500, paid in four 25% installments of $625. An irrigation plan is optional for $250. Installation is not included. Hiring Designscape is optional.

Questions? Call Claire at (858) 258-9595 or email support@designscape.com.

Start your design